ADVERTISEMENT
6. Use a Vacuum (Optional)
If you have a small vacuum cleaner, you can use it to suck out water from the phone’s ports and openings. This method can be more effective than shaking or blowing.
Tip: Use the vacuum on a low setting to avoid damaging delicate components.
7. Place the Phone in a Drying Agent
One of the most effective ways to draw moisture out of a water-damaged phone is to use a drying agent like silica gel packets or uncooked rice. Silica gel is preferable, as it is specifically designed to absorb moisture.
Instructions:
- Place the phone in a sealable plastic bag or airtight container.
- Add several silica gel packets or a cup of uncooked rice.
- Seal the bag or container and leave it for at least 24-48 hours.
Tip: Avoid using instant rice, as it can produce dust that may get inside the phone.
8. Avoid Common Mistakes
- Don’t turn it on too soon: Even if your phone appears dry, turning it on too soon can cause a short circuit. Wait at least 24-48 hours before attempting to power it on.
- Don’t use heat: Avoid using a hairdryer, oven, or microwave to dry your phone, as heat can damage internal components.
- Don’t plug it in: Charging a wet phone can cause further damage. Wait until you’re sure the phone is completely dry before plugging it in.
9. Test the Phone
After 24-48 hours, remove the phone from the drying agent and try turning it on. If it powers up, check all the functions, including the touchscreen, speakers, microphone, and ports, to ensure everything is working properly.
Tip: If the phone doesn’t turn on or functions improperly, take it to a professional repair service. They may be able to salvage it.
10. Prevent Future Water Damage
To avoid future accidents, consider investing in a waterproof phone case or a phone with a high water resistance rating (look for IP67 or IP68 certification). Additionally, be extra cautious around water, especially when using your phone near pools, sinks, or bathtubs.
Tip: Keep a small towel or cloth handy when using your phone near water to quickly dry it off if needed.
Conclusion
While dropping your phone in water can be a stressful experience, following these tips can greatly improve your chances of saving it. Remember, the key is to act quickly, avoid common mistakes, and be patient during the drying process. With a little luck and the right approach, your phone may live to see another day!
Bonus Tip: DIY Silica Gel Packets
If you don’t have silica gel packets on hand, you can make your own by filling a small cloth bag with uncooked rice or purchasing silica gel beads online. Keep a few packets in your emergency kit for future accidents.
By following these steps, you’ll be well-prepared to handle a water-damaged phone and potentially save yourself the cost of a replacement. Stay calm, act fast, and your phone might just survive its unexpected swim!
ADVERTISEMENT
