ADVERTISEMENT

Gas burners: 1 tablespoon is enough to make them shine again!

ADVERTISEMENT

Instructions:

  1. Remove the Burner Grates: Before you begin, make sure your stove is cool. Then, carefully remove the burner grates and drip pans. These parts are often the dirtiest and are easiest to clean when taken off the stove.
  2. Mix the Baking Soda Solution: In a small bowl, mix 1 tablespoon of baking soda with enough warm water to form a paste. The paste should be thick enough to coat the surface of the burners but not too watery.
  3. Apply the Paste: Using a soft cloth or sponge, apply the baking soda paste directly onto the burner grates and any other areas with visible stains. If there are stubborn spots, you can also use a toothbrush to scrub gently. The abrasiveness of the baking soda will help loosen the grime without scratching the surface.
  4. Let It Sit: Allow the paste to sit on the burners for about 15-20 minutes. During this time, the baking soda will work to break down grease, grime, and food residue, making it easier to wipe away.
  5. Scrub and Rinse: After the paste has had time to sit, gently scrub the burners with a sponge or cloth. For areas with tougher stains, use the toothbrush to get into smaller crevices. Once the grime has loosened, wipe everything away with a damp cloth.
  6. Dry and Reassemble: Once your burners are clean, dry them thoroughly with a clean towel to prevent water spots. Then, replace the burner grates and drip pans back onto the stove.

Tips for Maintaining Clean Gas Burners

Now that your burners are looking brand new, here are a few additional tips to keep them shining for longer:

  1. Clean Spills Immediately: As soon as a spill occurs, clean it up. Wipe down the burners and surrounding areas to prevent food from hardening and becoming difficult to clean later on.
  2. Weekly Cleaning: Perform a quick weekly cleaning of your gas burners to avoid buildup. A light wipe down with a damp cloth after every cooking session will help maintain their shine.
  3. Use a Burner Protector: Consider using burner liners or protective covers to shield the grates from spills and splatters. These can be easily wiped down or replaced.
  4. Avoid Abrasive Cleaners: While baking soda is effective, avoid using harsh chemicals or steel wool on your burners, as these can scratch and damage the surface.

Why This Method Works So Well

Baking soda works wonders on gas burners for several reasons:

  • Non-Toxic: Unlike many commercial cleaners, baking soda is safe to use around food, and it won’t leave behind harmful residues or strong chemical smells.
  • Abrasive but Gentle: The texture of baking soda helps to scrub away grime and food without scratching the surface of the burners or stove.
  • Deodorizes: In addition to cleaning, baking soda helps neutralize odors, leaving your stove smelling fresh.

Conclusion

With just 1 tablespoon of baking soda, you can transform your dirty gas burners into a shiny, sparkling surface in no time. This simple and affordable solution eliminates the need for harsh chemicals or complicated cleaning processes. By following these easy steps, you’ll keep your kitchen looking pristine, and your stove will be ready for your next delicious meal!

Give this trick a try the next time your burners need some TLC—your kitchen will thank you!

ADVERTISEMENT

Leave a Comment